UPnP/設定
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
]
開始行:
**設定 [#lced6db2]
#contents
----
***新upnpd.conf [#rf6dda29]
旧upnpd.confでは動かないので注意。~
UPnPdは動的にDNATを追加する(らしい。~
また、dnsmasqを利用して名前を引けるようにしてくれる(らし...
ウチはFWと同居のためFORWARDが必要(らしい。
# iptablesの場所
iptables_location = "/sbin/iptables"
# ログレベル 0-3
debug_mode = 2
# FORWARDのポリシーがDROPやREJECTのときに追加出来るよう...
create_forward_rules = yes
# FORWARDルールを追加するかどうか
forward_rules_append = yes
# チェーンの名前定義
forward_chain_name = FORWARD
prerouting_chain_name = PREROUTING
# 上り/下りbit/sec
upstream_bitrate = 102400000
downstream_bitrate = 102400000
# UPnPで開いてる時間(秒)
duration = 86400
# 説明xmlの名前
description_document_name = gatedesc.xml
lower_description_document = gatedesc1.xml
# xmlの場所
xml_document_path = /etc/linuxigd
# リッスンポート
listenport = 0
# dnsmasq起動スクリプトの場所
dnsmasq_script = /etc/init.d/dnsmasq
# dhcrelayのスクリプト名
dhcrelay_script = dhcrelay
# Uciコマンドの場所
uci_command = /sbin/uci
# resolv.confの場所
resolf_conf = /etc/resolv.conf
# イベント更新間隔(秒)
event_update_interval = 60
# dhcpcコマンド。OpenWrtはudhcpc、Linuxはdhclient
dhcpc_cmd = udhcpc
# networkスクリプトの場所
network_script = /etc/init.d/network
# UPnPの生死通知間隔(秒)
advertisement_interval = 1800
## ipv4/6関係
ipv6firewall_enabled = 0
ipv6inbound_pinhole_allowed = 0
control_point_authorized = 1
ipv6forward_chain_name = FORWARD_upnp
ipv6_ula_gua_enabled = 0
ipv6_linklocal_enabled = 0
ipv4_enabled = 1
終了行:
**設定 [#lced6db2]
#contents
----
***新upnpd.conf [#rf6dda29]
旧upnpd.confでは動かないので注意。~
UPnPdは動的にDNATを追加する(らしい。~
また、dnsmasqを利用して名前を引けるようにしてくれる(らし...
ウチはFWと同居のためFORWARDが必要(らしい。
# iptablesの場所
iptables_location = "/sbin/iptables"
# ログレベル 0-3
debug_mode = 2
# FORWARDのポリシーがDROPやREJECTのときに追加出来るよう...
create_forward_rules = yes
# FORWARDルールを追加するかどうか
forward_rules_append = yes
# チェーンの名前定義
forward_chain_name = FORWARD
prerouting_chain_name = PREROUTING
# 上り/下りbit/sec
upstream_bitrate = 102400000
downstream_bitrate = 102400000
# UPnPで開いてる時間(秒)
duration = 86400
# 説明xmlの名前
description_document_name = gatedesc.xml
lower_description_document = gatedesc1.xml
# xmlの場所
xml_document_path = /etc/linuxigd
# リッスンポート
listenport = 0
# dnsmasq起動スクリプトの場所
dnsmasq_script = /etc/init.d/dnsmasq
# dhcrelayのスクリプト名
dhcrelay_script = dhcrelay
# Uciコマンドの場所
uci_command = /sbin/uci
# resolv.confの場所
resolf_conf = /etc/resolv.conf
# イベント更新間隔(秒)
event_update_interval = 60
# dhcpcコマンド。OpenWrtはudhcpc、Linuxはdhclient
dhcpc_cmd = udhcpc
# networkスクリプトの場所
network_script = /etc/init.d/network
# UPnPの生死通知間隔(秒)
advertisement_interval = 1800
## ipv4/6関係
ipv6firewall_enabled = 0
ipv6inbound_pinhole_allowed = 0
control_point_authorized = 1
ipv6forward_chain_name = FORWARD_upnp
ipv6_ula_gua_enabled = 0
ipv6_linklocal_enabled = 0
ipv4_enabled = 1
ページ名: